A Trinity Holding, Inc. Company

Grinding Machines - GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle)

Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder Blanchard #22AD42, 42'' Vertical Spindle Rotary Surface Grinder
Select Machinery Warranty

Select Machinery Warranty

This machine is covered under the Select Machinery Warranty program by The Hartford Steam Boiler Inspection & Insurance Co.

Tag Number:
16073
Machine Type:
GRINDERS, SURFACE, ROTARY TYPE, (Vertical Spindle)
Manufacturer:
Blanchard
Model:
22AD-42
Year:
1987
Serial Number:
15736
Description:
Blanchard #22AD42, 42" Vertical Spindle Rotary Surface Grinder

Overall Specifications

  • 22" Grinding Wheel Diameterli>
  • 42" Magnetic Chuck Diameter
  • 44" Swing Inside Water Guard
    s
  • 24" Vertical Range,Standard
  • 3000 LBS. Maximum Load on Chuckli>
  • 50 HP Grinding Wheel Horsepower
  • 480 Volt /60 Hertz Main Motor i>
  • Automatic Servo Feed System
  • .0001-.100 IPM Down Feed Rates Ap
    proximate
  • 6 to 24 RPM Chuck Rotation Speeds
  • Anticipated Allen Bradley Upgrade
    Package
  • .. A-B Ultra 3HP servo drive
  • .. A-B MP series 3HP servo motor<
    /li>
  • .. A-B servo motor and encoder cables
  • .. A-B Panelview 600
  • .. A-B Panelview cable
  • .. A-B 10 slot rack
  • .. A-B SLC 5/03
  • .. A-B (3) 16 pt. input cards>
  • .. A-B (3) 16 pt. output cards
  • .. Custom P.B. / PV control stati
    on
  • Including programming, installation, run-off
    to perform a programable auto cycle.
  • Automatic Lube System
  • Standard Coolant System
  • 17,000 LBS. Approximate Base Weig
    ht
  • ***FINISHED PHOTOS ARE NOT THIS M
    ACHINE AND ONLY FOR REPRESENTATION PURPOSES***
  • Rebuid work to be completed inclu
    ding but not limited to: Base, saddle,keeper,head, column, cup and table ways machined and precision scraped. Motors repaired or rebuilt including new spindle bearings and windings cleaned and re-baked.  Table drive, saddle drive and upper gear boxes rebuilt including bearings and seals. Rack and pinion replaced. Rebuilt Elevating screw and nut. Installed automatic lube system to head and saddle ways. Installed new water guards and fit to machine. New elctrical controls.